Well Lights

Loosen the screws on the faceplate to separate the faceplate from the canister drop MR16 in the socket, install the brass faceplate on the PVC canister, this works for LT2202A, LT2202B, LT2203A, LT2203B, LT2204A, LT2204B, LT2204C, LT2206A, LT2206B.

Or just simply remove the faceplate , and place the PAR36 bulb in the gimbal, install the brass faceplate on the PVC canister, this works for LT2205A, LT2205B.

Find the ideal locations for the lights and dig holes(a post hole digger is recommended ) for the fixtures then place them in. You can use soil or aggregates to surround the fixture and then tamp it.

Running the wire just above ground at each fixture, and making sure to leave extra wire in case to make any changes.

Simply by cutting into the loops stripping approximately an inch off each end of the wire, there will be 2 connections at every light fixture, using a good gel filled waterproof connector that snaps tight will ensure a long lasting connection.